Werbung
Verfügbare Sprachen
Verfügbare Sprachen
15. Attachments - Do not use attachments not recommended by the product manufactures, as they may
cause hazards.
16. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket or table. The
product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only
with a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. Any
mounting of the product should follow the manufacturer's instructions and should use a mounting
accessory recommended by the manufacturer.
17. Moving the product - A product and cart combination should be moved with care. Quick stops,
excessive force and uneven surfaces may cause the product and cart combination to overturn.
18. Unused periods - The power cord of the appliance should be unplugged from the outlet during
lightning storms or when the apparatus is left unused for a long period of time.
19. Servicing - Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20. Please remove the power plug form the main power source or wall power source when not in use.
When plugged in to a power source, the system is in standby mode, so the power is not entirely cut off.
21. Replacement parts - When replacement parts are required, ensure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
22. Mains fuses - For continued protection against fire hazard, use fuses only of the correct type and
rating. The correct fuse specification for each voltage range is marked on the product.
23. Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If
you do, the speaker may be damaged when a peak level section is suddenly played.
24. The only means of completely disconnecting the product from the power supply is by removing the
power cord from the wall outlet or the product. The wall outlet or the power cord entry to the product must
remain freely accessible at all times while the product is in use.
25. Try to install the product near a wall socket or extension cord and shall be easily accessible.
26. The highest environmental temperature suitable for this product is 40°C.
EN
3
Introduction
Microlabs advance design concept, quality stereo system with superb audio characteristics.
Built for latest digital audio playbacks from various sources such as Mp3/Mp4, CD/DVD player or even TV
monitor outputs.
Capable of handling most digital output signals with ease and produce at high fidelity levels. Classy
monitor system with titanium dome tweeters.
Features
Powerful 2.0 stereo systems with full range spectrum capabilities
High quality wood cabinets with bass reflex system for depth and resolutions
Uncoloured audio and balanced tones
Wired remote control for easy master volume control, with 3.5 mm stereo input jack and 3.5 mm
earphones jack
Gorgeous black textured finish and front panels.
Packing list
You should find following items while unpacking:
H11 speakers
3.5mm stereo - 2RCA cable
Interconnect speaker cable, 2.5m
2.4GHz USB dongle
Infrared remote control
User manual
2pcs
1pc
1pc
1pc
1pc
1pc
Illustrations
Front View
1
2
3
Main / Right speaker
Left speaker
Front panel
1. Tweeter
2. Woofer
3. Master volume
Product connection and operation
Connections
1. Connect the left speaker to the main / right speaker binding post interfaces. Use the provided
interconnect speaker cable and lock between both binding posts with the bare copper wires.
For alternative pure distortion free connection, you can use third party "banana" plugs to connect.
2. Place both bookshelf speakers on extreme sides of the listening position.
3. Connect the playback device to the rear PC or AUX input interfaces of the right speaker.
Use the included 2RCA to 3.5mm stereo cable.
4. The main / right speaker should be placed near a power source and near the playback device
such as CD/DVD, Mp3/Mp4 player or TV.
5. Last, connect the AC power cable at the rear of the main / right speaker to the AC power supply
source. Please ensure t he AC power supply match the power requirement printed at the rear
panel.
Operation
1. Ensure the master volume is at the lowest setting.
2. Turn on the main AC power and switch at the rear of the main speaker.
3. Start the playback device and song.
4. Slowly adjust the volume to your preferred volume level and enjoy. Note that the volume knob
can be turn for level adjustment and toggle for input source change.
5. To change the input source, depress on the volume knob to change from PC input to AUX input
or vice versa. The red LED indicates PC source and when it turns orange, it will indicate AUX
source input.
6. For remote control, simply point directly at the amplifier unit and depress the button of choice on it.
7. For 2.4GHz wireless operation,
a. Connect the 2.4GHz USB dongle to the notebook or desktop. Windows® operating system will
Back view
1
2
6
7
3
ID PAIRING
PC
AUX
8
L
AUDIO
MULTIMEDIA SPEAKER
INPUT
MODEL: H12W
R
AC IN: 220V-240V~ 50Hz 600mA
MADE IN CHINA
4
AC IN
TO L SPEAKER
ON
9
5
OFF
L -
L +
Main / Right speaker
Left speaker
Back view
1. Bass reflex tunnel
2. Cooling fins
3. Wireless ID pairing button
4. Power switch
5. AC IN power cord
6. Binding posts
7. PC input
8. AUX input
9. Binding posts to Left speaker
EN
4
Werbung
