Operating Method / How To Use - PLABEAU G4+ Benutzerhandbuch

02 Operating method / How to use

Please turn the device ON/OFF by sliding the
power button located on the center of the
device. When the power button is on Mode
(2), the device operates on Normal Mode,
and when the power button is on Mode (1),
the device operates in Sensitive Mode.
Please connect the charging port to the main
body when Red LED light blinks.
Red LED light is on when it is charging.
Green LED light turns on when battery is fully
charged.
22
Operating method of PLABEAU
How to use PLABEAU 1
STEP 1
Please completely wash your face and other
areas of the skin you intend to apply PLABEAU
on. If the residue of make-up and other
cosmetic products are left on the skin, it may
reduce the efficacy of the device.
Please make sure to use PLABEAU when
your skin is completely dried.
When PLABEAU is on for 10 minutes, a blue LED light
!
flickers, indicating that the device has stopped If water is left on the skin, it may cause a stinging
!
sensation. Please use this product after your skin has
generating plasma. Flickering blue LED light indicates
recommended time of use. completely dried.
STEP 2
! Within PLABEAU's built-in battery, user can use
PLABEAU on broad skin parts 4 ~ 5 times. (app. 1 hour)
STEP 3
How to use PLABEAU 2 How to use PLABEAU 3
Please scan and massage the device on your Please apply moisturizers on your skin after the
skin while holding onto the grip section of use of PLABEAU.
the device. If you want more intensive care, Before applying the moisturizers, you can clear
set the device on Mode (2): Normal Mode up your skin texture by lightly washing off face
or applying toner over your face.
and apply PLABEAU on areas you intend to
focus on for 5 to 10 seconds.
We recommend applying the device for 10 minutes a
!
day. Depending on your skin sensitivity, the level of
stinging you experience may be different. If you have
sensitive skin, start by using the device for 2 to 3
minutes and incrementally increase usage of the device.
When plasma is generated, a blue LED light will turn
!
on. It is normal to hear noises and smell a metallic odor
as these are all byproducts of generating plasma.
How to use PLABEAU 4
After the use of PLABEAU, sebum and skin
impurities may remain on the plasma ceramic
pad. We recommend keeping the plasma pad
clean by regularly swiping it with alcohol and a
cotton pad after use.
Alcohol
cotton pad
Alcohol as
disinfectants
23