Wifi Control; Wi-Fi Module - CASO DESIGN SousVide Garer SV 1200 Pro Smart Bedienungsanleitung

3. Set desired temperatur with
4. Press button
with and
and . Confirm with
5. You can hear a signal and the operation indicator is flashing when the desired
temperature is reached..
6. The device will beep once desired temperature is reached. Place the vacuumed food
into the cooking vessel. If needed weight the vacuumed bags.
7. The device counts down the time and will beep again, once time is over. Then "End"
is shown in display.
8. When you want to change the settings please press
change settings as described above.
9. You can deactivate the device by pressing
switch to standby mode. Display shows C for °C or F for °F and the
illuminated. If you hold the
and °F.
► Risk of scalding! Carefully remove the food.
► If the device should indicate "EE1" in the LED display after switching on even though
the water filled in is above the minimum level, please add some salt to the water and
stir well.

18.2 WiFi control

The device can optionally also be controlled / programmed via app via WiFi. Download the
CASO Control App to your smartphone or tablet.

18.3 Wi-Fi Module

Press the W-Lan button
device beeps once and the W-LAN button
, to set the time. The timer is flashing. Set the desired hour,
confirm with
buttom for 3 seconds, you can switch between °C
Warning
Note: EE1
briefly to activate the integrated W-LAN module.The
and (0 – 90° C).
then set desired minute with
and the device starts the heating process
for 3 seconds. The device will
starts to flash slowly.
for 3 seconds and
button is
39