Warnings And Other Notices On The Device; Device Connections - Laserworld Club Serie Bedienungsanleitung

Manual: Club Series CS-400G
• Open the device at regular intervals and
remove any dust, particularly around fans
and laser. Otherwise the risk of overhe-
ating is imminent and will void the war-
ranty.
• If there are traces of fog fluid in the pro-
jector, clean it and change the position of
the fog machine.
• The devices of Ecoline, Evolution, Club
and Proline Series are not meant for pro-

6. Warnings and other notices on the device

Laser radiation!
Avoid exposure
to beam.
Laser class 3b
Caution of
radiation if cover
is removed

7. Device connections

page 6 / 19
•
• Removal of the warranty label as well
Please read manual before operation
Use in enclosed spaces only!
microphone
LED signal
fessional applications. After approx. one
hour of operation, the device should cool
down for about 15 minutes.
As for troubleshooting, please check the
FAQ on our website www.laserworld.com
as damages to the device caused by
improper handling, neglect of the sa-
fety instructions and service notes will
void the warranty.
DMX address
connection for power
DMX out DMX in
supply
Output power
Wavelength
Model type
Production
year
Power supply
& consumption
fan trim pot for
sensitivity control
ILDA in
ILDA out
key switch
Interlock
on / off switch