Samsung 6 Serie Bedienungsanleitung Seite 8

0 DIGITAL AUDIO OUT (OPTICAL)
Connects to a Digital Audio component such as a Home theatre receiver.
When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack: Decrease the volume of the TV
N
and adjust the volume level with the system's volume control.
5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
N
When the receiver (home theatre) is set to On, you can hear sound output from the TV's Optical jack. When the TV is
N
displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theatre receiver. When the source is a
digital component such as a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) and is connected to the
TV via HDMI, only 2 channel sound will be heard from the Home Theatre receiver. If you want to hear 5.1 channel audio,
connect the digital audio out jack on DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) directly to an
Amplifier or Home Theatre, not the TV.
! COMMON INTERFACE Slot
Insert CI (Common Interface) card into the slot.
When not inserting 'CI(CI+) CARD' in some channels, 'Scrambled Signal' is displayed on the screen.
–
The pairing information containing a telephone number, 'CI(CI+) CARD' ID, Host ID and other information will be displayed
–
in about 2~3 minutes. If an error message is displayed, please contact your service provider.
When the channel information coniguration has inished, the message 'Updating Completed' is displayed, indicating that
–
the channel list is now updated.
You must obtain a 'CI(CI+) CARD' from a local cable service provider. Remove the 'CI(CI+) CARD' by carefully pulling it
N
out with your hands since dropping the 'CI(CI+) CARD' may cause damage to it.
Insert the 'CI(CI+) CARD' in the direction marked on it.
N
The place of the COMMON INTERFACE Slot may be different depending on its model.
N
'CI(CI+) CARD' is not supported in some countries and regions, check with your authorized dealer.
N
The CI+ function is only applicable to UE********P model.
N
If you have some problems, please contact to service provider
@ EX-LINK
Connector for service only.
English - 6