Olympia NC 315 Bedienungsanleitung Seite 11

appears on the left-hand side of the display
and the value (total amount) of the bank notes
controlled until this moment appears on the
right.
The value indicator can display a maxi-
mum amount of 9,995 € (NC 325) or
99,995 € (NC 335).
Denominations (NC 325, 335)
You can display the number of bank notes of
a specific denomination (5 €, 10 €, 20 €, etc.)
which have been counted until now.
Æ Press the Report / MODE button, several
times, if necessary.
the bank note appears on the left-hand side of
the display and the number of bank notes of the
specific denomination on the right.
A few seconds after the Report / MODE
button has been pressed, the device
switches back to its default operating mode.
Resetting the Display of Value and
Quantity (NC 325, 335)
You can reset the counted values and quanti-
ties to zero in order to begin a new counting
process.
Æ Press the CLEAR / ON/OFF button.
The value and quantity indicators are reset
to zero.
The device does not have a memory func-
tion. When you switch the device off, the
memory for values and quantities is deleted.
Battery Operation (NC 315, 325, 335)
The device can also be operated for up to 90
minutes without an external power supply by
means of a rechargeable battery. Only use
the rechargeable battery distributed by GO
Europe.
The respective value of
Giu
Inserting/Changing the Battery
Æ Loosen the screw in the battery compartment
cover on the underside of the device.
Æ Open the battery compartment cover.
Æ Connect the plug on the battery with the sock-
et in the battery compartment.
There is a socket inside the battery com-
partment which fits to the plug on the bat-
tery. The plug cannot be connected wrongly.
Æ Close the battery compartment cover.
Æ Tighten the screw in the battery compartment
cover.
The battery is automatically charged as
soon as the device is connected to the
power supply via the power adapter. An icon
in the display indicates the current charge
capacity of the battery.
When operating in battery mode, the de-
vice switches off automatically if it re-
mains unused for 5 minutes.
Software Update
Æ Download the "update.bin" file from the
GO Europe homepage (www.go-europe.com).
Æ Load the "update.bin" on a Micro-SD memory
card.
Æ Switch the machine off.
Æ Insert the microSD memory card in the corre-
sponding slot provided on the rear of the ma-
chine. The contacts must point downwards.
Æ Switch the machine on.
grade process, the device produces a noise and
the display remains empty.
When the upgrade has been completed, the
noise stops and the display appears as nor-
mal.
If you want to complete the software up-
date on several machines, set the "up-
date.bin" file attribute to "read only".
During the up-
11