Inhaltsverzeichnis
Werbung
ENG
1. LED status indicator
2. Reset button
3. Speaker
4. Microphone
Mounting
1. Mount the camera by using the
screws.
2. Optional: Drill a hole (14 mm wide)
through the wall for the camera.
3. Adjust the camera angle by aiming
and rotating it. Fasten the thumb screw.
Reset
Press and hold about 6 seconds for
reset. LED flashes quickly.
Install and use
1. Download and install the app "QNECT
smart home" from Apple App Store or
Google Play Store on your mobile device.
2. Launch the app "QNECTsmart home".
3. Create a new account or log in to your
existing account.
4. Tap "+" to add the device.
5. Choose category and then the type of
product from the list.
6. Connect the device to power.
7. If the LED/lamp does not flash: Reset
the device.
If the status indicator flashes: Confirm in
the app.
8. Confirm the Wi-Fi network and
password.
9. Enter the device name.
2
Cleaning and maintenance
Do not use cleaning solvents or
abrasives.
Do not clean the inside of the device.
Do not attempt to repair the device. If the
device does not operate correctly,
replace it with a new device.
Clean the outside of the device using a
soft cloth.
Support
More product information can be found
at auroragroup.eu.
Contact us by e-mail:
smarthome@qnect.eu.
DK
1. LED-statusindikator
2. Nulstillings knap
3. Højttaler
4. Mikrofon
Montering
1. Montering af kameraet skal gøres
med skruer
2. Mulighed: Bor et hul (14 mm) i
væggen til kameraet.
3. Justér kameravinklen så den passer til
hvor det skal sidde og monter det med
skruen.
Nulstille
Tryk og hold nede i ca. 6 sekunder for at
nulstille. LED blinker hurtigt.
Installer og brug
1. Download og installer appen "QNECT
smart home" fra Apple App Store eller
Google Play Store på din mobilenhed.
Werbung
Inhaltsverzeichnis
