Panasonic FW334 Bedienungsanleitung Seite 17

Installation Menu Contents
Displays automatic tuning options. Digital Aerial: Searches and stores aerial DVB stations. Digital
Automatic channel
Cable: Searches and stores cable DVB stations. Analogue: Searches and stores analogue stations.
scan (Retune)
Satellite: Searches and stores satellite stations.
Manual Channel
This feature can be used for direct broadcast entry.
Scan
Network Channel Searches for the linked channels in the broadcast system. Digital Aerial: Searches for aerial network
Scan channels. Digital Cable: Searches for cable network channels.
Analogue Fine You can use this setting for fine tuning analogue channels. This feature is not available if no analogue
Tune
channels are stored.
Displays satellite settings. Satellite list: Displays available satellites. You can Add, Delete satellites
Satellite Settings or Edit satellite settings on the list. Antenna installation: You can change satellite anntenna settings
and/or start a satellite scan.
Installation Displays installation settings menu. Standby Search: Your TV will search for new or missing channels
Settings (Optional) while in standby. Any new found broadcasts will be shown.
Use this setting to clear channels stored. This setting is visible only when the Country option is set
Clear Service List
to Denmark, Sweden, Norway or Finland.
Select Active
This setting allows you to select only the broadcasts within the selected network to be listed in the
Network channel list. This feature is available only for the country option of Norway.
You can use this menu item to monitor signal related informations such as signal level/quality, network
Signal Information
name etc for available frequencies.
First Time
Deletes all stored channels and settings, resets TV to factory settings.
Installation
All manuals and user guides at all-guides.com
English - 16 -