Edimax ES-5844P Schnellinstallationsanleitung Seite 6

6. Specifications
• Standards : IEEE802.3 / 3u / 3x and 802.3af Power over Ethernet
• Transmission : 10/100Mbps supports full or half duplex
• Data Transfer Rate : PPS (packets per second)
Speed
100Mbps
10Mbps
• MAC Address and Self-learning : up to 1K
• Buffer Memory : 96Kbyte on chip frame buffer
• Flow Control : IEEE802.3x compliant for full-duplex, Backpressure
flow control for half-duplex
• Switching Method : Store & forward
• Network Interface : 8 10/100Mbps RJ-45 ports
• UTP Cable : 10BASE-T: UTP Cat. 3, 4, 5 or up, 100BASE-TX: UTP
Cat. 5 or up
• PSE Power Feeding Supports : (Port 1 to 4)
"Endpoint" via TP pin 1, 2, 3, 6
• Diagnostic LEDs :
System LED – Power
PoE LED – PoE Act (Port 1 to 4)
Per Port LED – Link / Act, 10/100Mbps
• Power Requirement : AC Line
Voltage / Frequency 100-240V / 50-60Hz
Max. 4W (in case no PD device
Consumption connected) or Max. 65W (with 4 x 15.4W
PoE devices connected)
• Operation Temperature : 0° to 40°C
• Operation Humidity : 10% to 90%
• Storage Temperature : 0° to 55°C
• Dimensions : 44(H) × 220(W) × 130.5(D) mm
• Complies with FCC Part 15 Class A, CE Mark Approval
Note : To connect this device to a Router, Bridge or Switch, please refer
to the corresponding device's technical manual.
5
All manuals and user guides at all-guides.com
Forwarding Rate
148,800 PPS
14,880 PPS