Preparations For Operation; Operating The Appliance - Royal Catering Rccd-Rt1 9L Bedienungsanleitung

3. GN container for food
4. Fuel paste container
5. Frame
6. Fuel paste container shelf
7. Water container
8. Carrying handle
9. Air vent
10. Support legs
3.2.

Preparations for operation

POSITIONING THE APPLIANCE
The maximum ambient temperature and relative humidity limits not to be
exceeded are +40°C and 85% RH, respectively. Position the appliance where good
air circulation is ensured. Maintain a minimum clearance of 10 cm from all sides of
the appliance. Keep the appliance away from any hot surfaces. Always operate the
appliance on a level, firm, clean, fireproof, and dry surface and out of the reach of
children and individuals with reduced mental, sensory and intellectual capacities.
Before the first use, remove all accessories and wash them clean along with the
entire appliance.
INSTALLING THE APPLIANCE
Models: RCCD-RT6_9L, RCCD-RT3_6L i RCCD-RT7_6L
Install a flat electric heater by engaging its grooves in the bosses on the heater
frame cross-piece.
CAUTION! The electric heater is not supplied with this product.
3.3.

Operating the appliance

1. Put the water container on the frame. Fill the container with warm water
(use enough water so that it will not spill over when the GN container is
placed in the water container).
2. Place the GN container with the food in it in the water container. Close the
lid.
3. Models: RCCD-RT1_9L, RCCD-RT2_9L, RCCD-RT3_9L, RCCD-RT1_6L, RCCD-
RT2_6L, RCCD-RT4_9L, RCCD-RT5_9L, RCCD-RT8_9L, RCCD-RT4_6L, RCCD-
RT9_6L, RCCD-RT10_9L, RCCD-RT11_6L, RCCD-RT12_6L, RCCD-RT13_9L,
RCCD-RT14_6L, RCCD-RT15_6L: Place the fuel paste from a can (not included)
in the included fuel paste containers. Light the fuel paste and place the fuel