Product Diagram & Quick Start Guide - KLIM SHIFT Benutzerhandbuch

ENGLISH
PACKAGE CONTENTS AND PRODUCT DIAGRAM
Keyboard
USB to Type-c cable
Set of replacement keycaps (standard OEM) Keycap puller
Switch puller
*diagrams correspond to the US layout,
some keys vary in the UK layout
1. ON/OFF switch
2. USB-C port
3. 2.4G Wireless Receiver
Magnetic frame (attached)
2.4G Wireless receiver
User manual + Reference card
6
4. FN Button
5. Mode button
6. USB-C cable
QUICK START GUIDE
Wired mode
Wired mode: connect the USB cable to the keyboard, and then
connect it to your computer. Flick the switch behind the keyboard to
the ON position. Press the mode switch underneath the keyboard
until it is set to "Wired" (orange light).
Wireless mode (2.4G)
Wireless mode (USB receiver): take the wireless USB receiver from
behind the keyboard and connect it to your computer. Flick the switch
behind the keyboard to the ON position. Press the mode switch
underneath the keyboard until it is set to "2.4G mode" (green light).
Bluetooth mode
Bluetooth mode: Press the mode switch underneath the keyboard
until it is set to "Bluetooth" (blue light). Press FN + Q for 3 seconds to
look for compatible devices. The light starts blinking to indicate its
pairing status. Go to the device you want to pair the keyboard to and
select KLIM Shift 5.0 / 3.0 to establish the connection. For detailed
Bluetooth instructions and pairing of multiple devices, please check
the Bluetooth Connection Mode section on the next page.
IMPORTANT: on any mode, make sure that the ON/OFF switch is set to
ON and that the correct mode is selected underneath the keyboard.
2
Orange: Wired
Green: Wireless (2.4G)
Blue: Bluetooth