Package Contents - Hama I 500 Bedienungsanleitung

All manuals and user guides at all-guides.com
Contents

• Package contents

• Placement
• Connecting the loudspeaker system
• Operation and sound settings
• Settings with Windows XP
• Settings with Windows Vista
• FAQ
• Safety notes
• Specifi cations
Package contents
• 1 x Subwoofer
• 2 x Satellites
• 1 x power supply unit
While you are unpacking, ensure that all components are
included and that there is no visible damage (crimped
cables, damaged insulation, etc.)
We recommend that you keep the packaging, including
the Styrofoam inserts, for transport at a later time.
Placement
1. Place the satellite speakers to the left and right of the
monitor and position them so that they face toward
you.
2. The distance between each of the two speakers and
your head should be as equal as possible.
3. You can place the subwoofer underneath your desk.
Because the human ear cannot localise low tones, the
exact position of the subwoofer is not very important.
00057133bda.indd Abs3:9 00057133bda.indd Abs3:9
Connecting the loudspeaker system
Connect the cable to the green jack plug on the
loudspeaker output socket on your sound card and then
connect the cable to the yellow RCA plug on the socket
on the rear of your subwoofer.
Connect the power supply unit cable to the socket on the
rear of the satellite and then plug the power supply unit in
to a free outlet.
Carefully read through the safety notes before using the
device for the fi rst time.
Operation and sound settings
Switching the loudspeakers on
Use the on/off switch on the satellite.
Volume
You can control the volume using the control on the
satellite.
Headphone output
When you attach headphones to the satellites, the audio
signal to the loudspeaker is automatically interrupted
and the signal is only played back on your headphones.
You can continue to use the volume control to control the
volume on your headphones.
9
18.02.2008 8:17:18 Uhr 18.02.2008 8:17:18 Uhr