Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Technical Information
Centronic Surface Housing
Art. no.: 4030 200 035 0
Intended use
This surface housing allows Centronic flush-mounted devices to be surface-mounted when installed in-
doors. Please observe the installation and operating instructions of the respective Centronic flush-mounted
device.
Installation
Caution
Electrical connections should only be carried out by a qualified electrician.
Always disconnect the power supply prior to assembly and adhere to relevant regulations
during electrical installation. Protect the surface housing against moisture! Use the strain
relief to secure the connecting cable against disconnection.
1. For flush-mounted devices disassemble the prongs (if applicable).
2. Insert the power supply unit or switching element of the flush-mounted device into the surface housing.
3. Now use the provided surface housing screws to fix the power supply unit or switching element into posi-
tion.
4. Now carefully place the frame with the control unit onto the surface housing.
2
Screws
Prong
Strain relief
de
en
fr
Becker-Antriebe GmbH
35764 Sinn/Germany
www.becker-antriebe.com
55
nl
Werbung
