Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8.
After a successful connection the blue status
LED stops blinking and now lights up.
9.
You can assign your connected device direct-
ly to a room, but you can also simply ignore
it. The device then appears in the device
overview under „All devices".
During setup, the fan should be near
your router to have a strong WLAN
signal.
If the automatic or manual addition still
does not work properly, please try the AccessPoint
mode as described below.
1.
Press the power button for about 5 seconds
until a second beep is heard and the blue status
LED fl ashes rapidly.
2.
Press the power button again for about 5
seconds until a second beep is heard and the
blue status LED now fl ashes slowly.
3.
In the APP press the „+" sign (top right).
4.
To add the appliance manually, please select
„Fan" from the „Small household appliances"
section.
5.
Now select „Other methods" in the uper right
corner of the APP and then select „AP mode".
6.
Confi rm the following step.
7.
Select your WLAN network and enter your
WLAN password. „Confi rm" it.
info@inline-info.com
8.
The fan now acts as an access point and crea-
tes its own WLAN, to which you must connect
your smartphone or tablet directly.
9.
So click on „Connect now". In the next window
the available WLAN will appear, name of the
fan is e.g. „SmartLife-FE5E", the letters and
numbers will be different.
10.
Select it to establish a direct connection. You
can ignore the message from your smartphone
or tablet that there is no Internet connection.
11.
Now go back a few steps until the connection is
displayed in the APP and the fan is successfully
integrated into the existing WLAN.
12.
The APP now connects to the device, wait until
the display of your smartphone confi rms this.
13.
After a successful connection the blue status
LED stops blinking and now lights up.
14.
You can assign your connected device directly
to a room, but you can also simply ignore it.
The device then appears in the device overview
under „All devices".
Basically, settings/scenarios/automati-
ons for several families can be stored
in this APP.
The administrator has authorization
to create families and access all fa-
milies.
9
Werbung
Inhaltsverzeichnis
