Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
www.inline-info.com
9.
For fi nal safety, use the supplied screw to
screw the front protective grille to the rear
protective grille..
10.
Place the device on a fl at, stable surface.
11.
Insert the plug of the power cable into the
socket.
12.
The standby LED lights up blue.
6
9. MANUAL OPERATION VIA KEYS
SPEED
Briefl y press the power button to turn on the de-
vice. A short beep acknowledges that the device
is switched-on. The fan now rotates to speed le-
vel 1, the status LED „1" lights up blue.
To increase the speed to level 2, press the speed
button briefl y, which is confi rmed by a short beep.
The status LED „2" now lights up.
To increase the speed to level 3, briefl y press the
speed button again, which is confi rmed by a short
beep. The status LED „3" now lights up.
When the speed button is pressed again, the
speed decreases to level 1.
SLEEP MODE
If you press and hold the speed button for about
3 seconds, the fan switches to sleep mode, con-
fi rmed by a short beep and the sleep mode LED
lights up. In this mode the speed is automatically
reduced by one level after 30 minutes and then
remains at level 1. To deactivate the sleep mode,
press the speed button again for about 3 seconds
until the beep sounds and the sleep mode LED
goes out again.
TIMER FUNCTION
To activate or change the timer function, briefl y
press the timer button until the desired opera-
ting time (1 hour / 2 hours / 3 hours / 4 hours) is
selected. Each time a change is made, the beep
sounds and the respective LED lights up blue.
Werbung
Inhaltsverzeichnis
