Werbung
Verfügbare Sprachen
Verfügbare Sprachen
16450 Drum Stick Holder
- generously sized quiver (ø90mm, 240mm deep) for drum sticks
- with a prismatic adapter for tube diameters of up to 30mm
- the flexible quiver material provides space saving storage
- practical use - tools not needed
Thank you for choosing this product.
The instructions provide directions to all of the important set up and handling steps.
We recommend you keep these instructions for future reference.
SAFETY NOTES
- use only with suitable stands: i.e., stands that
-
are sufficiently stable and sturdy and designed
-
to carry the additional weight
- exclusively for drum sticks
- do not place any object in the quiver, which
-
could damage the quiver material
- Velcro fasteners (6x) cover the entire area -
-
and are completely attached to the ring of the
-
holder
- damaged parts may not be used and are to be
-
replaced.
SETUP INSTRUCTIONS
Assemble the Holder
The product comes completely pre-assembled.
Attach Holder to the Stand
The prismatic clamp fits tubes with
diameters of up to 30 mm.
1 To open up the quiver to full size for the drum
1
sticks – place your hand in the quiver to
1
create space for the drum sticks.
2 The prismatic clamp is threaded through the
2
tube and is attached by tightening the finger
2
screw. Ensure that the quiver is opened up for
2
the drum sticks.
Attach the Quiver to the Holder
3.a The quiver can, if needed, be removed from
3.a
the holder.
3.a
Open up the (6x) Velcro fasteners.
3.b When attaching the quiver press all of the
3.b
Velcro fasteners into place. Please ensure
3.b
that the Velcro fasteners are aligned
3.b
properly.
All manuals and user guides at all-guides.com
Werbung
