Konig & Meyer 19733 Schnellstartanleitung Seite 2

19733 iPad mini wall mount
- Securely Held in Place! The best way to enjoy and use your iPad mini
- The iPad mini clicks into the holder quickly and effortlessly.
- It is secured by 3 drill holes in the wall, ensuring a secure hold
- All iPad mini connections are accessible.
- Can be rotated 360° - it can be positioned horizontally and vertically.
- Rotating is easy, and your iPad mini stays securely in the position you select.
Thank you for choosing this product. The instructions provide directions to all of the important set up and handling steps. We recommend you
keep these instructions for future reference.
SAFETY NOTES
- Carefully clip the iPad mini onto the holding plate and ensure that the iPad mini fit is secure - be careful you when the iPad mini is
positioned.
- The holder is affixed to the wall with three screws. ENSURE:
- a. Walls, that are too weak or have electrical and water conduits are not suitable. If this is the case consult a qualified handyman.
- b. Depending on the wall composition (Wood, Concrete, Bricks etc.) use the appropriate mounting materials (not included with the delivery)
- c. Ensure that the screw and nuts are tight and check this routinely.
WALL MOUNT
The wall mount comes fully assembled
and can be mounted to the wall.
1 The three drill holes are to be placed
1 according to the round wall plate:
1 - according to a good estimate
1 - practical know how
2 Mark the drill holes
3 Drill the anchor holes
3 - ø 6 mm for plastic anchors
3 - ø 3 mm for wood anchors
4 Mounting example concrete wall
5 Mounting example wood wall
If the wall is made of aerated
concrete, plasterboard etc. we
recommend that you consult a
hardware store to purchase the
suitable anchor materials.
USAGE NOTES
ORIENTATION of the iPad mini
6 Place the iPad mini according to the
6 HOME-Button-Symbol (consult the
6 embossing on the holding plate).
PLACEMENT of the IPAD MINI
7 First PLACE the iPad mini into the
7 bottom area and...
8 ...then CLIP it into the top
REMOVAL of the IPAD MINI
19 Hold the iPad mini and LIFT
19 the upper hook
10 Hold the iPad mini and REMOVE it
FORMAT
11 The holder is equipped with a 360°-rotating function. The
11 iPad mini can be placed in any desired position - vertical -
11 horizontal and everywhere in between. The iPad does not
11 have to be removed for the holder.
TECHNICAL DATA
Swivel Bearing: Polyamid (PA-6)
Material Holding Plate: Polypropylen (PP)
Screws, nuts, washers, springs: steel
Max. load iPad mini
Base dimensions: 208,7 x 89,6 x 143,7 mm
Dimensions
Box: 235 x 90 x 171 mm
Weight net 0,26 kg, gross 0,44 kg
KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
19733-000-55 Rev.06 03-80-108-00 7/14
All manuals and user guides at all-guides.com
WALL MOUNT mounting examples
ORIENTATION of the iPad mini
Volume Control
On / Off
Switch Camera (Back)
Microphone
Microphone
Camera (Front)
3.5 mm-
Connector
Home-Button
PLACEMENT of the IPAD MINI
Stone, concrete
Lightning
connector
Speakers
(the holder is embossed with info on where the iPad mini is to be placed)
(false placement results in the embossed user elements being covered up! Please note)
REMOVAL of the IPAD MINI
FORMAT
Final Position Incline Position
- landscape - cannot be clicked into place,
- click into place -
-
FAULT FINDING (F) and REPAIR (R)
F: Holder is not stable B: Check the wall screws
F: Holder is not stable B: Check the connection between the wall plate
F: Holder is not stable B: and holder plate
F: iPad mini is not firmly in place B: Place the iPad into the holder correctly
F: iPad mini is not firmly in place B:
however it does stay in the
selected position
(so you can hear the click)
Wood
Final Position
- portrait
- click into place