Fitting The Side Covers; Setting The Height Of The Articulated Arm - Jumbo KORSIKA Originalbetriebsanleitung

18 – Fitting the side covers
Secure the side cover on both sides using the screws provided. Note that the cover on the motor side is wider.
19 – Setting the height of the articulated arm
1. Loosen the lower of the two Allen screws.
2. Turn the upper Allen screw clockwise to adjust the articulated arm upwards and counter-clockwise to adjust
the articulated arm downwards.
3. Re-tighten the lower Allen screw to fix the set position.
When adjusting the height of the articulated arm, the load on the articulated arm must always be reduced so as to
avoid damage to the suspension! (Push the articulated arm up)
211021_MOOD_BDA Markisen_Korsika_RZ.indd 91 211021_MOOD_BDA Markisen_Korsika_RZ.indd 91
91
21.10.21 15:03 21.10.21 15:03