Werbung
2. Transport, installation and
operating instructions
Dear customer,
The PE collecting trough is a quality product that has
been conceived for practical use down to the last detail
and meets all official requirements for a problem-free use.
Details can be found in the following operating instruc-
tions. Thank you for trusting our product.
Your CHEMOWERK
1.
General information
1.1 Attention should be paid to the following documents
– Approval Z-40.22-388, for PE collecting trough
(operator extract)
– Regulations of the water, industrial and building
laws, hazardous substances law where applicable
– Inspection declaration (rear cover)
1.2 Fields of use
The rectangular, open collecting troughs of polyethylene
(PE) can be used as a part of storage systems with mobile
containers.
They are provided for storing:
– used and unused engine and gear oils with flash
points above 100°C
– pesticides
– various acids, alkaline solutions, saline solutions
and chemicals according to the resistance list in the
approval.
2.
Transport
Pay special attention to the following to avoid damages
and maintain the warranty claims:
– do not drop or throw the collecting trough
– do not place on edges or sharp objects
3.
Installation conditions
The installation conditions for the respective media can
be found in the pertinent water, industrial and building law
regulations.
The PE collecting troughs should be installed on a firm,
level base.
4.
Maintenance
PE collecting troughs require no special maintenance.
The collecting trough should be checked regularly by the
operator according to its approval.
3
Inspection declaration
Inspection declaration
for PE collecting trough
of HD-PE as a storage system for mobile containers.
Article No.:
211.X
Approval number: Z-40.22-388
We confirm that the PE collecting trough complies with
the provisions of the general construction inspection
approval. The construction and leak tests have been
performed.
Quality Assurance
GB
11
Werbung
