Trouble Shooting - Inferum Rofes E01C Betriebsanleitung

All manuals and user guides at all-guides.com
Table 1 shows the problems which you can solve independently. In case there are other
problems occurred, please, contact the manufacturer's representative. Do not attempt any
repairs by yourself!
Problem issue
No connection with the measuring unit.
A message on the screen:
«The device is not connected».
No signal from LED.

10. TROUBLE SHOOTING

• check the USB cable connection;
• if the cable is connected, disconnect and
replace it by a similar one;
• if the problem persists, contact the ser-
vice centre.
• Check the USB cable connection.
• If the cable is connected, disconnect and
change it to a similar one.
• If the problem persists, contact the ser-
vice centre.
Table 1.
Solution
EN
53