Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Electrical Connection
Disconnect power. Connect the unit according to the indications
on the terminals. The plug-in terminal strip features reverse polarity
protection.
Control inputs:
Terminal 12 (ZU / counting interruption)
A signal on terminal 12 interrupts the pulse evaluation for as long as
the signal is active; the last value counted remains in the display. When
the input signal has stopped, counting is resumed with the next input
pulse.
Terminal 13 (RESET/PRESET)
A pulse on terminal 13 sets the actual value display (of H1) to 0 or to
the preset value (see programming parameter 15).
The control inputs can be npn or pnp switching.
Signal inputs:
If you use npn-switching pulse pick-ups the opto-coupler inside the
unit must be plugged into the npn-position.
When assembling the housing ensure correct contacting of the
internal plug connections. The correct assembly can be tested
as follows:
Apply the supply voltage and press the "P" button.
If the counter changes to the programming mode, the assembly of
the unit is correct.
All manuals and user guides at all-guides.com
9
pnp
npn
Werbung
Inhaltsverzeichnis
