Beko BCNE400E40SN Bedienungsanleitung Seite 17

Operating the product
3. Cooling Compartment Temperature
Setting Key:
Allows setting of temperature for
cooler compartment. Pressing this key
will enable the cooling compartment
temperature to be set at 8,7,6,5,4,3,2
and 1 Celcius.
4. Cooling Compartment Symbol:
The temperature values of the cooling
compartment is displayed on the screen
when this symbol is active.
5. Freezing Compartment Symbol:
The temperature values of the freezing
compartment is displayed on the screen
when this symbol is active.
6. Freezing Compartment
Temperature Setting Key:
Temperature setting is made for
cooler compartment. Pressing this key
will enable the freezer compartment
temperature to be set at -18,-19,-20,-21,
-22,-23,-24 Celsius.
7. Quick Freezing Key:
When the quick freeze key is pressed,
the quick freeze symbol (
be illuminated and the quick freeze
function shall be activated. Freezing
compartment temperature is set to -27
Celcius. Function is cancelled when the
key is pressed again. The quick freezing
function shall be automatically cancelled
after 24 hours. To freeze a large amount
of fresh food, press the quick freeze key
before placing the food in the freezer
compartment.
8. Fault Condition Indicator:
This indicator (
when your refrigerator cannot perform
adequate cooling or in case of any
sensor error. "E" shall be displayed on
the Freezing Compartment temperature
indicator and figures such as 1,2,3... shall
Refrigerator/User Manual
) shall
) shall be active
19 / 26 EN
be displayed on the cooling compartment
temperature indicator. These figures
provide information to the authorized
service on the error that has occurred.
Exclamation mark may be displayed
when you load warm food to the freezing
compartment or keep the door open for
a long period of time. This is not a fault,
this warning shall be removed when the
food is cooled down or when any key is
pressed.
9.On/Off Function:
This function (
the Fridge turn off when pressed for 3
seconds. The fridge could be turned on
by pressing On/Off button for 3 seconds
again . When the function is active, all
indicators turn off.
) allows you to make