Werbung
Please read this manual carefully and keep it for
future use
Safety and care advice
This product is intended to be assembled and used only as described in these
instructions.
The seat and footrest adjustment
It is important to adjust the depth and height of the seat and footrest properly in
accordance to the height of your child. See pictures on pages 7, 18, 21. From time to
time compare the seat and footrest position with the height of the child.
The seat assembly
Height: The seat is assembled at the right height, if the child's elbows are at the same
level as the surface of the table.
Depth: The correct depth of the seat is reached when the child's back touches the
backrest and when ¾ of the hips are on the seat. It is important that there is enough
space under the child's knees. The seat shouldn't cross the side edge of the chair
more than 4-5 cm.
The footrest assembly
Height: The footrest is assembled correctly when the child's feet touches the footrest,
and its hips are on the seat properly.
Depth: Make sure that the footrest's front edge is ALWAYS behind the front bottom
edge of the chair. The footrest needs to be placed at least 5cm deeper than the front
bottom edge of the chair. See pictures on page 21.
The seat cushion/ 5-point safety belt
Assemble the seat cushion and the 5-point safety belt according to the pictures on
pages 30-36. Consider that for the attachment of the safety belt, the seat cushion is
needed.
Care
Only clean by using damp cloth and mild detergent. Do not use bleach or abrasive
cleaners. At the end, make sure to wipe the furniture with dry cloth. Moisture may
cause cracks on the wood and coating. Please do not use microfiber cloth. The
furniture should be protected from direct sunlight, and should not be located near
heating appliances.
Please check the functionality of the high chair regularly.
џ
Make sure that the stability of the frame is given and that the fasteners are
џ
tightened.
Only use parts from manufacturer supplied.
џ
Do not use the high chair if any parts are broken, or missing.
џ
Before assembly check parts for shipping damages. After assembly, shipping
damages won't be accepted.
NOTE: Solid wood is a natural product! It is typical for solid wood to have color or
џ
structure di erences due to the amount of the branches that the product contains.
The possible blemishes are not a reason for complaint.
Before using the high chair, make sure all screws are tightened.
џ
Do not use the high chair in cases of damaged or torn parts, or if parts are missing.
џ
Pinewood is softwood, please make sure to clean the high chair carefully to avoid
џ
damages on the surface.
All manuals and user guides at all-guides.com
3
Werbung
