2�4 Handling; 2�5 Installation Location; 2�6 Housing Temperature; 2�7 Tampering With The Device - autosen AN001 Bedienungsanleitung

All manuals and user guides at all-guides.com
2.5 Installation location
For the correct operation the device must be mounted in a housing which can only
be opened using a tool or in a locked control cabinet (both protection rating IP 54
or higher) as an enclosure in accordance with EN 61010�
2.6 Housing temperature
As described in the technical specifications below the device can be operated in
a wide ambient temperature range� Because of the additional internal heating the
operating elements and the housing walls can have high perceptible temperatures
when touched in hot environments�
2.7 Tampering with the device
In case of malfunction of the unit or queries please contact the manufacturer� Any
tampering with the device can seriously affect the safety of operators and machi-
nery� This is not permitted and leads to the exclusion of any liability and warranty
claims�
22