Using The Equipment For The First Time - CEMO 100 L Bedienungsanleitung

4. Using the equipment for the first time

1. Affix the stickers enclosed with the tank
documents permanently to the front panels.
2. Secure the lower hose holder plate to the
container with the hose holder spacers (rigid)
and the screws (M6 x 40).
Screw the cushions (3 pieces) to the tank.
Screw the upper hose holder plate to the
cushions (M6 x 10).
Rigid spacer Cushion
All manuals and user guides at all-guides.com
Hazard label
UN 1202
(for diesel)
3. Installing the delivery hose
Slide the anti-kink spring over the end of the
hose
Important!
RISK OF INJURY
when using the spring clip
Only remove the plastic holding clip (blue plastic
part) when the spring clip is in its final position!
Push the spring clip over the anti-kink spring.
Push the hose onto the pump outlet opening.
Remove the plastic holding clip from the spring
clip.
Screw the delivery nozzle to the hose sleeve.
Wind up the hose.
Insert the delivery nozzle into the integrated
holder and secure with the sliding bolt lock.
4. Place the diesel trolley in a horizontal position
and remove screw cap a .
Filling the tank
Important!
i
Please always use an automatic delivery
nozzle to avoid overflows.
GB
13