Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Components and controls
2
1
4
Before first use
• Make sure you remove all packaging materials from the appliance and attachments.
• Clean the appliance and attachments as described in the "Care and cleaning" section before
using them for the first time.
Mains connection
Before plugging the appliance into the mains socket, make sure that it is turned off
to avoid unintentional running. Set the speed switch (2) to "0".
The mains socket must be close to the appliance and easily accessible.
• Unwind the power cord completely.
• Plug the mains plug into a mains socket.
Operation
Always turn off the appliance and unplug it from the mains supply before installing or
removing the attachments.
Wait for the running attachments to come to a complete standstill after turning the
appliance off. Never touch the running attachments.
Never put any objects other than food to be mixed into the mixing bowl.
The appliance must not be operated continuously for more than 5 minutes. Allow
sufficient time (20 minutes) for the appliance to cool down before resuming
operation.
• The attachments should be inserted into the respective slots on the underside of the
appliance. The attachments should click into place.
The dough hooks have holders with a different shape. The dough hook with an
additional ring on the holder must be inserted into the slot with the thicker end. The
beaters can be inserted into the slots as desired.
• Dip the attachments into the food to be mixed and turn on the hand mixer.
• Use the speed switch (2) to set the desired speed:
"0"
Appliance is turned off
"1" to "6"
low to high speed (depending on the level)
• Pressing the turbo button (3) sets the highest speed briefly regardless of the selected speed.
• When you are done, make sure you turn off the hand mixer (by setting the speed switch (2)
to "0") before removing the attachments from the mixed food.
• To remove the attachments, press the eject button (1).
The eject button (1) is disabled while the appliance is in operation.
3
5
1 Eject button
2 Speed switch
3 Turbo button
4 Dough hooks
5 Beaters
Tips
• The rear side of the hand mixer housing is flattened. The appliance can be placed on this side
during pauses or when stored.
• Always select the low speed at the beginning of mixing. Gradually increase the speed as you
proceed through the mixing process.
• Use low speeds for hard or tough food and high speeds for light and liquid food.
• Always turn on the hand mixer when the attachments are dipped into the food and turn it off
before removing the attachments from the food. This prevents food from splashing around.
• The beaters are best suited for preparing sauces, puree, creams, cream and light doughs
(e.g. batter) etc., whereas the dough hooks are ideal for preparing firm doughs and masses
such as short dough or yeast dough, potato dough, mince or bread dough, as well as for
heavy-duty operations.
• Avoid mixing continuously for too long. Observe the time for mixing/stirring the food as
described in your recipe. Dry ingredients should be mixed with the food until they are
thoroughly combined. Low speed should always be used in this case.
• The required mixing time and the desired results depend heavily on climatic conditions,
seasonal temperature fluctuations, temperature of ingredients and their various properties
that can vary from region to region.
• Wait for chilled ingredients such as butter or eggs to reach room temperature before mixing
them. Take these ingredients out of the fridge and wait for some time before mixing.
• Make sure you crack eggs in a separate bowl and only then add them to the mixing bowl to
prevent eggshells from ending up in the food to be mixed.
Care and cleaning
Always unplug the appliance from the mains socket before cleaning. The motor unit,
the power cord and the mains plug must not be immersed in water and the parts of
the hand mixer must not be cleaned in a dishwasher or with a steam cleaner.
Never use aggressive detergents, rubbing alcohol or other chemical solutions, as
these may damage the casing or cause the product to malfunction.
• Wipe the motor unit with a damp cloth and then wipe it dry.
• The attachments can be cleaned in a dishwasher or rinsed manually.
Disposal
Electronic devices are recyclable waste and must not be placed in household waste.
At the end of its service life, dispose of the product according to the relevant statu-
tory regulations.
Specifications
Operating voltage .................................220-240 V/50 Hz
Power consumption ..............................max. 400 W
Continuous operation / cool-down ........5 / 20 minutes
Speed levels .........................................6
Weight ..................................................0.9 kg
Power cord ...........................................approx. 1 m
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in
electronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is
prohibited. This publication reflects the technical status at the time of printing.
Copyright 2021 by Conrad Electronic SE.
2368891_v1_0821_02_VTP_m_en
Werbung
