Using The Controller With Cpwi Software - Celestron 94036 Bedienungsanleitung

7. Connecting to a PC (continued)
AUX cable
SkyPortal WiFi
Module
Mount power cable
Fig 12
If you are using a Celestron mount with the SkyPortal WiFi Module, you can connect to the
controller via WiFi through the mount using the supplied AUX cable. You can also use the
included mount power cable to power your mount from the power output port.
NOTE: If your mount only has one AUX port, you'll need to purchase
the optional AUX Port Splitter. This converts the mount's single AUX
port into two.

8. Using the Controller with CPWI Software

If you are already controlling your telescope or camera from a
computer, you will love controlling the Smart DewHeater and Power
Controller 4x with our free Celestron CPWI software. To download
the latest version, visit: https://www.celestron.com/pages/celestron-
pwi-telescope-control-software
Install the software and open CPWI. Select "Start" if the opening
window appears. Then, click on the "Connection" icon in the upper-
left corner of the screen. If you are using a wired connection, select
"Mount USB." If you are using the SkyPortal WiFi Module, click on
the "Connection" icon and then select "WiFi." CPWI should find and
connect to the controller. Once connected, the Dew Heater icon will
appear in the selection menu on the left side of the screen.
Selecting the Dew Heater icon will display the Dew Heater menu
8 | ENGLISH
Connection icon
Mount power cable
Dew Heater icon
AUX cable
(Figure 13). The first line in the Dew Heater menu indicates the total
power draw for any devices connected to the controller. To see more
data, click Overview.
OVERVIEW
The Overview screen displays the power draw for each port on the
controller (Figure 14). The icons beside any ports currently in use will
turn orange with the power draw over time in the small graph to the
right. In the upper-left corner of the Overview screen, you can see
the total power and current draw from the controller and the input
voltage from the power source. Below that, you can see the ambient
temperature and humidity data from the environmental sensor and the
calculated dew point.
Fig 14
Overview screen
Fig 13
CPWI Dew Heater menu