Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Battery inside
3. SET FUNCTIONS
Power Button (A):
• Press power button one time to activate the heater. The indicator light (1) will on the control panel.
• Press power button a second time to turn off it.
TIME Button (B):
• When the unit is operating, you can set the timer to switch the heater off automatically after the set time.
Press the timer button repeatedly to select the desired time period in half hours increments: 0,5h, 1h,
1,5h ....7,5h. The related indicator light will illuminate on the LED display
Heating Mode Button (C):
When the heating mode is selected the related indicator light (2) on the control panel will turn on
according to the heating mode selected: LOW-HIGH-AUTO. The UV function automatically turns on
when the heating mode works.
•
Press the heating mode button one time to turn on the function at LOW volume. The related indicator
light (2) will illuminate on the control panel.
•
Press the heating mode button another time to change to HIGH mode. The related indicator light (2)
will illuminate on the control panel.
•
Press the heating mode button another time to change to AUTO mode. The related indicator light (2)
will illuminate on the control panel.
•
Press the heating mode button another time to turn off the function. The related indicator light (2) will
illuminate on the control panel.
Temperature Button (D):
Press the "+" "-" button to set the temperature.to increase or decrease the temperature, the maximum
can be set to 38℃, the minimum can be set to 6℃.
Mist & Flame Button (E):
• When the power on, press the mist & flamer button (E) long 3 seconds, the mist indicator (6) on, at
the same time the water tank indicator is on (Noted: the water tank is red when there is no water).
• Press the mist & flamer button one time, the flame function works, showing the red flame.
• Press the mist & flamer button another time, showing the blue flame.
• Press the mist & flamer button another time, showing the yellow flame.
• Press the mist & flamer button another time, the flame off.
CLEANING AND MAINTENANCE
NOTED:
Before cleaning the appliance always disconnect the power plug from the
receptacle.
1. Do not dip the device in water or splash it with any other liquid.
2. Do not use gasoline, alcohol or solvents for cleaning the device.
3. Do not spray insecticides or similar means on the device.
4. Do not use the device in rooms with high humidity.
5. Do not cover the device – risk of fire!
Battery type: CR2025
Quantity: 1pc
4
72H
.
Werbung
Inhaltsverzeichnis
