PNI Adventure F200 Bedienungsanleitung

LED flashlight PNI Adventure F200
Technical specifications
• LED: 1 x 10W (spot beam); 3 x 5W (flood beam)
• Power source: 26650 Li-Ion battery, 4000mAh, 3.7V
• Waterproof: IPX4
• Micro USB port for charging the battery
• Light intensity: 550 lumens (spot beam 100%); 1500 lumens (flood beam 100%)
• Lighting range: up to 500 meters (spot beam 100%); up to 175 meters (flood beam 100%)
• Operating time: up to 4.5 hours (spot beam 100%); up to 2.5 hours (flood beam 100%)
• Dimensions: Ø40 x 150 mm
• Weight: 283 gr (battery included)
Usage instructions
Spot beam:
1. Briefly press once the button on the flashlight. The flashlight will light up to 10% of its lighting
capacity.
2. With each press, the brightness will increase to 30% and 100% of the lighting capacity.
3. Press the button again to turn off the flashlight.
Flood beam:
1. Press and hold the flashlight button to turn on the flood beam at 10% of its maximum lighting
capacity.
2. With each press, the brightness will increase to 30% and 100% of the lighting capacity.
3. Press again to turn off the flashlight.
Notes:
• Press and hold the button on the flashlight to quickly switch from spot beam to flood beam and
vice versa.
• Press twice the button on the flashlight to activate strobe effect.
Safety warnings
• Use only the recommended type of battery. Using a higher voltage battery can cause the LED
to burn out.
• If you do not use the flashlight for a long time, remove the battery from the flashlight.
• Do not point the light directly into a person's or animal's eyes.
Simplified EU Declaration of Conformity
SC ONLINESHOP SRL declares that the PNI Adventure F200 LED Flashlight complies with the
EMC Directive 2014/30/EU. The full text of the EU Declaration of Conformity is available at the
following website:
https://www.mypni.eu/products/8550/download/certifications
User manual 1