PNI Adventure F450 Gebrauchsanweisung

PNI Adventure F450 LED torch
Technical specifications
• LED: CREE XHP50.2
• LED power: 1 x 20W
• Power supply: battery pack 18650, 4400mAh, 3.7V, 16.28Wh
• Waterproff class: IPX5
• Focus: Yes, telescopic
• Connectors:
- Micro USB for charging the internal battery
- USB2.0 for charging other mobile devices (e.g.: smartphone iOS/Android)
• Light intensity: 1500 lumens (luminosity 100%)
• Lighting distance: up to 450 meters (luminosity 100%)
• Operating time: up to 10 hours (luminosity 40%)
• Working modes: 100%, 40%, 10%, 3%, stroboscopic
• Dimensions: Ø45.5 mm x 247mm
• Weight: 380 gr (battery included)
Usage instructions
1. Briefly press once the button on the LED torch. The torch will light up to 40% of the total
lighting capacity.
2. Briefly press the button again. The brightness will be reduced to 10%.
3. Briefly press the button one more time. The brightness will be reduced to 3%.
4. Briefly press the button on the torch for the fourth time. The torch will turn off.
5. Activating the BOOST function: Briefly press once the button on the torch. The torch will light
up to 40% of the total lighting capacity. Then long press the same button on the torch. The
torch will light up 100% of its total lighting capacity, which will last a maximum of 40 seconds or
until the button is pressed again.
6. Briefly press twice the button on the torch. The torch will emit a strobe light.
Safety warnings
• Use only the original battery. Any other battery may increase the voltage of 3.7V and may burn
the LED.
• If you do not use the torch for a long time, remove the batteries.
• Do not direct light directly into a person's or animal's eyes.
EU Simplified Declaration of Conformity
SC ONLINESHOP SRL declares that LED torch PNI Adventure F450 complies with the Directive
EMC 2014/30/EU and RED 2014/53/UE. The full text of the EU declaration of conformity is
available at the following Internet address:
https://www.mypni.eu/products/7849/download/certifications
User manual 1