Herunterladen Inhalt Inhalt Diese Seite drucken

Fbt Audio Contractor MS02-CD3/T Gebrauchsanleitung Seite 18

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 28
TUNER SECTION
2. Function explanation
Keys
1 - 10
When press these keys only, the tuner will jump to preset station 1~10.
1 press / 1 step tuning by" DOWN" "UP" key. When DOWN key is
DOWN
pressed for more than 1.5 seconds seek tuning is started.
1 press / 1 step tuning by" DOWN" "UP" key. When UP key is pressed
UP
for more than 1.5 seconds seek tuning is started.
This key can call and write in preset memory. The FM band have fixed
preset memory 60 CH. The AM band have the fixed preset memory 40 CH.
The memory mode is set, when MEMORY key was pressed.
MEMORY
The memory mode is released automatically after 5 seconds.
The "MEMO" mark is flashed in the memory mode.
A receiving frequency is written in the fixed preset memory, when
"MEMORY" key is pressed after number keys was pressed in the
memory mode.
When this key is pressed, the preset memory is increment.
M-UP
When this key is pressed, the preset memory is decrement.
M-DOWN
When SLEEP key is pressed, the sleep function is set and the time is
displayed for 2 seconds. The sleep time is changed as shown below,
every pressing the SLEEP key during the sleep time is displayed.
SLEEP
The sleep mark is on during the sleep function is set.
The sleep function is cleared, if the SLEEP key was pressed when the
sleep time is not displayed and sleep function is set.
The power is automatically off fatter sleep time, when sleep function is set.
Press this key once the preset station number will add 10.
+ 10
Press this key, the tuner change between stereo and mono mode.
MO / ST
This is Auto search and memory function. Press this key for more than
1.5 seconds, the tuner will search the station and store in memory
ASM
automatically.
This is the direct search function. Press this key once, then use number
key to input the station frequency, again press DIRECT key to confirm
DIRECT
the frequency. The tuner jump to this station. If the input frequency is
beyond the range, the tuner will display ERR.
CD / TUNER
Switch between CD and TUNER for remote control.
90
80
70
60
Explanation
50
40
30
20
10
OFF
Panel
Remote

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis