UK
TURBO
4H
8H
2H
UV-C
Light
Filter change
TURBO
Freia comes with an automatic filter replacement warning by turning on a flashing red LED
4H
8H
UV-C
Light
Light
(A). Order a new filter and replace the old one as described in the "Before operation" section.
By pressing and holding the On/Off button (B) for 5 seconds, the filter lifetime will be
ON/OFF
FILTER RESET
resettled and the LED (A) will stop flashing.
Light
ON/OFF
FILTER RESET
A
B
IMPORTANT!
The life time for the filter is 2200 hours.
UV light bulb change
This is how you change the UV light bulb:
Remove the filter as described in the "Before operation" section.
1. The unit is now ready to get the UV light bulb changed.
2. a) Remove the screw. b) Rotate the UV cover gently to the right.
3. a) Pull the cover. b) The UV protector will now be visible.
4. a) Carefully unplug the UV protector.
5. a) Gently remove the UV light bulb from the UV protector (b) and replace.
MV-2515-07-2020 . eeese-aircare.com © All rights reserved by eeese air care ApS
54