Chapter 2 - Hardware Installation; Jumper Settings - Mini-Itx P55-T36 Bedienungsanleitung

E
English

Chapter 2 - Hardware Installation

Jumper Settings

Clear CMOS Data
Clear CMOS
1 2
1-2 On: Normal
(default)
1 2
2-3 On:
Clear CMOS Data
If you encounter the following,
a) CMOS data becomes corrupted.
b) You forgot the supervisor or user password.
c) The overclocked settings in the BIOS resulted to the system's instability or
caused system boot up problems.
you can reconfigure the system with the default values stored in the ROM BIOS.
Clear CMOS Switch
The Clear CMOS switch at the rear panel of the system provides convenience by
allowing you to clear the CMOS without having to remove the chassis cover. Press
the black button to clear the CMOS data.
Clear CMOS Jumper
To load the default values stored in the ROM BIOS, please follow the steps below.
1. Power-off the system then unplug the power cord.
2. Set JP2 pins 2 and 3 to On. Wait for a few seconds and set JP2 back to its
default setting, pins 1 and 2 On.
3. Now plug the power cord then power-on the system.
10
All manuals and user guides at all-guides.com
switch
3
3
JP2