Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Front panel (image B)
Select button, to switch HDMI input (1-4) to HDMI output 1
1
ARC button, to enable or disable ARC for HDMI output 1
2
Select button, to switch HDMI input (1-4) to HDMI output 2
3
ARC button, to enable or disable ARC for HDMI output 2
4
Power switch
5
6
Remote control sensor
7
HDMI input indicator LEDs for HDMI output 1
8
ARC indicator LED for HDMI output 1
9
HDMI input indicator LEDs for HDMI output 2
q
ARC indicator LED for HDMI output 2
EDID management switch
w
Power indicator LED
e
Rear panel (image C)
Power supply port
1
L/R analog stereo audio output port
2
Optical digital output port
3
HDMI outputs (1-2)
4
5
HDMI inputs (1-4)
Remote control (image D)
Power button
1
HDMI input selection buttons for HDMI output 1
2
HDMI input selection buttons for HDMI output 2
3
Audio Return Channel (ARC) buttons
4
Safety instructions
-
WARNING
• Ensure you have fully read and understood the instructions in
this document before you install or use the product. Keep the
packaging and this document for future reference.
• Only use the product as described in this document.
• Do not use the product if a part is damaged or defective.
Replace a damaged or defective product immediately.
• Do not drop the product and avoid bumping.
• This product may only be serviced by a qualified technician for
maintenance to reduce the risk of electric shock.
• Do not expose the product to water or moisture.
• Disconnect the product from the power source and other
equipment if problems occur.
• If the power cable is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
• Do not expose the product to direct sunlight, naked flames or
heat.
• Place the product on a stable and flat surface.
• Do not open the product.
• Keep the product out of reach from children.
Connection diagram (image E)
• Connect HDMI input devices E
a HDMI cable. A HDMI input device can be for example a DVD
player, a set top box or a game console.
• For audio, the following connections are possible:
Audio L/R
Toslink (Optical)
HDMI pass-through
• Connect the HDMI output devices E
C
using a HDMI cable.
4
• Connect the power supply port C
supplied DC 5 V, 2 A power adapter A
Using the product
For the following options, use the remote control D
• Press the HDMI input buttons D
each HDMI output (1, 2).
• ARC D
: Enable or disable Audio Return Channel (ARC).
4
Use ARC if your HDMI output device is the audio source (for
example if your TV has a built-in tuner) and you want to return the
audio signal through the HDMI connection.
Make sure the HDMI cable supports ARC.
4
c
Kurzanleitung
HDMI-Matrix
Weitere Informationen finden Sie in der erweiterten
Anleitung online: ned.is/vmat3482at
Der Nedis VMAT3482AT ist ein 4K @ 60Hz 4x2 HDMI-Matrix-Switch.
Die 4 HDMI-Eingänge und 2 HDMI-Ausgänge unterstützen eine
umfassende Matrix-Schaltung.
Die HDMI-Ausgänge können mit 2 digitalen oder analogen
Audioausgängen kombiniert werden.
Bestimmungsgemäße Verwendung
Dieses Produkt verbindet bis zu 4 HDMI-Eingänge mit bis zu 2
HDMI-Ausgängen und schaltet zwischen diesen um.
Das Produkt kann auch Video und Audio splitten.
Jegliche Modifikation des Produkts kann Folgen für die Sicherheit,
Garantie und ordnungsgemäße Funktionalität haben.
5
1
to the HDMI inputs C
Connect stereo audio equipment E
using a L/R cable.
Connect Toslink supported audio
equipment E
using Toslink cable.
3
Note: Toslink does not support Dolby
Digital plus.
You maybe need to change the audio
settings of your input device.
Connect an audio receiver E
4
between your HDMI output E
the HDMI splitter.
The audio receiver must support a
HDMI pass-through.
You will need 2 HDMI cables.
4
to the HDMI outputs
1
to a power outlet using the
3
.
234
23
to select the input for
VMAT3482AT
5
using
2
4
and
:
Werbung
Inhaltsverzeichnis
