Trouble Running - Märklin 72760 Bedienungsanleitung

Four (4) aspect exit signal, 2 buttons (addresses).
If everything is working properly, the label that comes with
the control box can be affixed to the latter and then be
lettered.
On a stationary setup, the control box can be mounted in
place with the E786130 screws (not included with the control
box).

Trouble Running

If there is no light visible on the signal, check the following:
• Is the switched mode power pack plugged into the wall
Signal aspect
• Are all of the connecting cables properly plugged into
• Is a connecting cable damaged? Replace any damaged
outlet and the Base Station? If not, plug it in.
their connections? If not, press on the plugs to make sure
they are all the way in the connections.
cables.
11