Werbung
Verfügbare Sprachen
Verfügbare Sprachen
13510 Percussion
table »Pro«
INTENDED USE
High quality mobile percussion table for
beginners, advanced and professionals.
FEATURES and CAPABILITIES
- Load-bearing capacity 10 kg
- Stable and robust stand with continuous height
-
adjustment from 820 to 1350 mm
- With large (570 x 370 mm), softly padded tray
-
for noiseless and gentle depositing of parts
- Ideal for transport and storage thanks to foldable
-
stand and removable storage plate
- Simple and quick to assemble and handle without
-
the use of tools
Thank you for choosing this product. The instructions provide
directions to the important setup and handling steps. We recommend
you keep these instructions for future reference.
SAFETY NOTES
- Maximale Tragfähigkeit 10 kg
The floor must be load bearing and even.
- Installation safety:
-
- Center the laptop (weight bearing load)
-
- Pull the legs apart (= horizontal struts)
-
- Ensure that the music desk is firmly placed on the extension tube
- -
as far as it goes: particularly after the position has been changed.
- The fact that the product is collapsible and adjustable, can result
-
in pinching and wedging of fingers and hands. Careful and
-
attentive handling during setup, operation and disassembly is
-
indispensable.
SETUP INSTRUCTIONS
Remove stand and tray from the box
1. SET UP the STAND:
1.1 Loosen the adjustment screw a bit,
1.2 expand the legs until...
1.3 ... the connecting struts are level.
1.4 Re-tighten the clamping screw.
5
NOTE: Manual strength is enough; Do not over-tighten
5
the screws it can negatively affect the components
2. MOUNTING the TRAY:
2.1 emove the wing nut from the lower plate of the tray,
2.2 Place the lower plate into the extension tube as far as it will go
2.3 Tighten the wing nut more or less:
so that the tray movement can be set so that it can
2.3
2.3
be moved easily or that it is held tightly in place.
FUNCTIONS
3. ABLAGEPLATTE & SCHAUMSTOFFEINLAGE
3.1 The tray is:
3.1
- generously sized (B x T x H: 581 x 381 x 72 mm),
3.1
- provides space for a variety of gadgets,
3.1
- lined with 50 mm thick foam
3.2 The soft, nubby foam provides for:
3.2
- careful treatment of the deposited gadgets
3.2
- best noise insulation when putting down the parts
3.2
- effective protection against rolling away of deposited
3.2 -
parts due to the nubby structure.
4. HEIGHT ADJUSTMENT
4.1 NOTE: Prior to loosening the clamp screw hold
4.1
the extension tube in one hand.
4.2 Loosen the clamping screw of the clamp/bracket;
4.3 adjust the extension tube to the desired height
4.4 re-tighten the clamp screw.
TECHNICAL DATA
Tubes, struts, tray: Steel, powder coated black
Washers, threads: steel, galvanized
Brackets, handles, lower plate: Polyamid (PA)
Material
End caps, clamp caps: TPE
Edge protection profile: PVC, metal strips
Nubby cut: foam, ET22
Stand: 100 x 96 x 650 mm; Tube Combination: ø 30/25 mm
Dimensions
Height: 820-1350 mm (max. base-ø 750 mm)
Tray: internal 568 x 368 x 70 mm, t=1,5mm
Load capacity max. 10 kg, Perkussion, variety of gadgets
Box
680 x 165 x 390 mm
Weight
6.4 kg
Carrying case 11450
Accessories
Sheet music trays 122a, 12218, 131
(optional)
Eye glass holder 16050 among others
Magnets 11560, 11580
Box
2. MOUNTING the TRAY
3. ABLAGEPLATTE & SCHAUMSTOFFEINLAGE
4. HEIGHT
ADJUSTMENT
1. STAND
5. DIMENSIONS
KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
13510-000-55 Rev.01 03-79-936-00 12/21
Werbung
