Specifications - Tripp Lite NFI-U08-2 Bedienungsanleitung

Specifications

Power
Input Voltage
Connection
Reverse Polarity Protection Present (all models)
Power Consumption
(System Only)
Grounding Screw
Interface
RJ45
LED
Environmental
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
Operating Altitude
Regulatory Approvals
EMI/EMC
ATTENTION: If the switch is used in a manner not specified here, the
protection provided by the switch may be impaired.
NFI-U05: Single power input 12~
48VDC/0.15A
NFI-U08-1: Single power input 18~
30VDC/0.2A
NFI-U08-2: Single power input 12~
48VDC/0.2A
NFI-U05/NFI-U08-1: 3-pin terminal block
NFI-U08-2: 2-pin terminal block
NFI-U05/NFI-U08-2: 3W
NFI-U08-1: 4W
Present (all models)
5 or 8 x 10/100Base-T, auto-negotiation,
auto-MDI/MDI-X, Full/Half Duplex and
Flow Control
PWR (Green): Power
100 (Green): Port 1~5 or 1~8 100 Mbps
Ethernet speed
LNK/ACT (Green): Port 1~5 or 1~8 data
transmitting/receiving
-40°C to 75°C (-40°F to 167°F)
-40°C to 85°C (-40°F to 185°F)
5 to 95% (Non-Condensing)
5 to 95% (Non-Condensing)
2000 m
FCC Part 15
EN 55011
EN 61000-6-4
EN IEC 61000-6-2
EN 55032
EN 55024
14