Inhaltsverzeichnis
Werbung
Macroalgae Reactor
Thank you for choosing the Makro Resort MR 800.
The macroalgae reactor is an independent algae refuge that removes unwanted nutrients such as nitrates and
phosphates from the marine aquarium. The completely autonomous system continuously removes nutrients from
the aquarium water through the controlled growth of macroalgae. The fast-growing and very easy-to-cultivate
green alga Chaetomorpha linum is used for nutrient removal. Regular harvesting of this algae removes the
nutrients used up in algae growth from the aquarium's circulation. The LED lamp used inside the Makro Resort
has a special colour spectrum that provides reliable support for optimal macroalgae growth. When using small
filter systems, the macroalgae reactor offers a very effective alternative to algae refuges, which often require a lot
of space and effort. The macroalgae reactor can be operated both externally and in a filter system / filter sump.
You will find everything you need to know about initial installation, assembly, adjustment, care and maintenance
of the Ocean Sump in these instructions. These instructions are part of the product. They contain important
information about safety, set-up and operation! Keep these instructions for future reference!
Safety instructions For LED lights:
· Never look directly into the LED lights! Improper use of
this light may be dangerous to the eyes.
· This LED light is not suitable as residential lighting.
· Photobiological safety according to DIN EN 62471: Risk group 1 (low risk).
· Do not cover the LED light.
· Indoor use only.
· Always disconnect the LED light from the mains
before carrying out maintenance or cleaning.
· The mains plug for the LED light must always be accessible with the light installed.
· Never operate the LED light if the connecting cable or the plug is damaged.
· If the connecting cable or plug of the LED light is damaged, it must be replaced by the manufacturer or
its customer service.
· Never reach for the LED light if it has fallen into water. In this case always immediately unplug the mains
plug. Allow to dry completely.
· Never install the power supply on or in the cover frame.
· The aquarium and appliance should be positioned next to a wall socket to prevent water from splashing
onto the socket, power supply or plug. For your safety it's advisable to make a drip loop with the mains
cord to prevent water running along the cord from entering the outlet (see illustration).
Scope of delivery: The following parts are included in the contents of delivery of the Makro Resort:
∙ 1 x Makro Resort MR 800
∙ 1 x Operating instructions
∙ 1 x LED light 15 W
∙ 2 x Ready-mounted connection fittings (16 mm) for inlet and outlet hoses
∙ 1 x Power supply unit 12 V
Technical data:
LED light MR 800: 15 W
Flow rate: max. 1,000 l/h
Power supply unit:
Base plate dimensions:
DC 12V / 1,000 mA
20.2 x 25.0 cm
Hose connection inlet: 16 mm
Total height: 60.0 cm
Hose connection
Aquarium size: 200 – 800 l
return flow: 16 mm
6
Dohse Aquaristik GmbH & Co. KG · Otto-Hahn-Straße 9 · 53501 Gelsdorf · Germany
216 mm
Example
Illustration
202 mm
Assembly and placement:
Step 1: Carefully remove the Makro Resort and accessories
from the packaging and verify all parts are complete and check parts
for damage. If parts are missing your damaged, please contact
your speciality retailer as soon as possible.
A) LED light
G) Housing lid
B) Return flow hose connection
H) Screws
I) Housing
C) Inlet hose connection
D) Ball valve
J) Power supply unit
K) Cultivation platform
E) LED screw connection
F) Viewing window
L) Gasket
Step 2: Loosen the screws (H) on the housing lid (G) and portion out the macroalga (green alga
Chaetomorpha linum) on the cultivation platform (K). If necessary, these can be easily fixed, e.g. with
cable ties. Then screw the housing lid (G) onto the housing (I). Make sure that the gasket (L) is seated
correctly. Then fit the LED light (A) to the housing (I) with the LED screw connection (E). Place the
Makro Resort as shown, either in or next to the filter system / filter sump.
Step 3: Connect the hoses to the Makro Resort MR 800. Connect a feed pump with a capacity of between
800 and 1,000 l/h to the inlet hose connection (C). Connect the hose for the return flow into the filter system /
filter sump to the return flow hose connection (B). Check all connections for leaks. Once the feed pump is
connected and the Makro Resort has been filled, the LED light (A) can be connected to the power supply unit (J).
The viewing window (F) in the housing lid (G) shows that the LED light is lit.
Accessories and spare parts: The following accessories and spare parts for the Makro Resort are
available or can be ordered from your specialist retailer:
Spare part name:
LED light 15 W
Power supply unit for LED light MR 800
Gasket for LED light MR 800
Lid MR 800
Gasket for lid MR 800
Screws for lid MR 800
Cultivation platform MR 800
Tel.: +49 (0) 22 25 - 94 15 0 · Fax: +49 (0) 22 25 - 94 64 94 · info@dohse-aquaristik.de · www.dupla-marin.com
Makro Resort MR 800:
82536/10
82536/11
82536/12
82536/13
82536/14
82536/15
82536/16
7
Werbung
Inhaltsverzeichnis
