Operation - Deuba monzana MZH2501 Bedienungsanleitung

6.0 OPERATION

The heater can be controlled either by the remote control, or by the buttons on the LED display.
Inserting the battery
Turn the remote control to the back and pull out the battery cover. Insert the battery
•
according to the instructions and the polarity (+/-) of the battery.
Insert 1 x CR2025 battery into your remote control.
•
Replace used batteries as described above.
•
2. Press ON/OFF once, the digital screen will show "P 1"
which means the first power setting.
3. Press ON/OFF twice, the digital screen will display "P 2"
which means second power setting.
4. Press ON/OFF three times, the digital screen will display
"P 3", which means third power setting.
5. After the function is turned on, the timeout can be set
from 1 to 24 hours, "0 1" indicates one hour timeout, "0 2"
indicates two hours timeout, etc.
22 www.DEUBAXXL.de