English - bbluv Cäm Bedienungsanleitung

Cäm
EN
SET UP CAMERA
Place the camera unit in a safe and convenient location, such as on a night
table or shelf, or hang it on the wall.
NOTE
Do not place the monitor within reach of the baby. If there is interference with the picture or sound, try moving the
unit to a different location, and ensure the unit is not close to other electrical equipment.
SETUP BEFORE USE
1. Powering the Camera Unit
Insert one end of the included charging cable into the power socket
on the back of the camera. Insert the other end into the included power
adapter. Then insert the adapter into the wall socket.
2. Turn the monitor's power on.
(The monitor is provided with a lithium battery. If the monitor has enough
power, please go directly to Step 3.)
Insert one end of the charging cable into the power socket
on the side of the monitor. Insert the other end into the included power
adapter. Then insert the adapter into the wall socket.
3. Once the monitor is charged or plugged in, press and hold the ON/OFF
button to turn it on.
I
NOTE
It takes an average of 1 to 2 hours to fully charge the monitor's battery. Remember that the red light on the
sound bar will remain on while the monitor is plugged in. If you do not see a red light, it means your monitor is
not plugged in properly and is not charging.
10

ENGLISH

E
M