Atag VA7114RT Gebrauchsanweisung Seite 164

Table continued from last page
Settings
4. Display settings
5. Feedback sound
6. Buzzer volume
7. Rinse aid
8. Super rinse
9. Extra Dry
Options
Contrast top
display1/2/3/4
0/1/2/3
0/1/2/3
0/1/2/3/4/5/TAB
On/Off
On/Off
For adjusting the contrast of the display.
This sound is used to confirm each button
press.
The buzzer indicates when a dishwashing
program has ended.
Error messages are always indicated by a
loud buzzer.
Setting for rinse aid dosage. The rinse aid
dispenser can be adjusted between 0 (Off)
and 5 (High dosage).
Increase the rinse aid dosage:
If the dishes have water marks.
Decrease the rinse aid dosage:
If the dishes have a sticky white/blue
film.
If the dishes are streaked.
Build-up of foam. If you have very soft
water, the rinse aid can be diluted 50:50
with water.
When using an all-in-one detergent that
contains rinse aid, you can activate the
setting TAB.
Super rinse adds two extra rinses.
Activated in the following programs:
Eco
Universal
Plastic
Upper half
Lower half
Activate the setting Extra Dry to improve the
drying results. Energy consumption is slightly
increased.
Activated in the following programs (although
not if the Auto Open option is selected):
Eco
Auto
Universal
Plastic
Upper half
Lower half
Settings
23