Safety Instructions; Warranty - Behringer V-TONE BASS DRIVER DI BDI21 Bedienungsanleitung

2 V-TONE BASS DRIVER DI BDI21
When activated, the GND LIFT disconnects the ground connection
(7)
between input and output. Depending on the grounding of the
connected equipment, this can eliminate hum or ground loops.
Use the footswitch to activate/deactivate all the tone
(8)
functions (EQ, DRIVE, tube emulation). When deactivated, the
BDI21 functions solely as a standard transparent DI box.
This LED illuminates when the effect is activated (see (8)).
(9)
Connectors
(10)
Use this ¼" TS INPUT connector to plug in the instrument cable of
(10)
your bass guitar or other instruments.
BAL OUT is the BDI21's balanced mic level output. Use a high-
(11)
quality, balanced XLR (microphone) cable to connect the driver to
a mixing console.
The unbalanced ¼" TS OUT connector sends the signal to your
(12)
bass amp.
Bottom of the BDI21
(14)
SERIAL NUMBER. The serial number of the BDI21 is located at
(13)
the bottom.
BATTERY COMPARTMENT. Open the lid to install or replace the
(14)
9 V battery.
◊ ◊
The BDI21 is powered as soon you insert a plug into the
INPUT. The battery is "disconnected" when the plug is
removed. For this reason, the BDI21 has no on/off switch.
To prolong battery life, always disconnect the input when
the driver is not in use.
(12)
Power supply connector
(11)
Use the DC IN connection to plug in a 9 V power supply (not
(15)
included).

2. Safety Instructions

Do not use near water, or install near heat sources. Use only authorized
attachments/accessories. Do not service product yourself. Contact our
qualified servicing personnel for servicing or repairs, especially when
power supply cord or plug is damaged.

3. Warranty

For the applicable warranty terms and conditions and additional
information regarding Music Tribe's Limited Warranty, please see
complete details online at community.musictribe.com/pages/
support#warranty.
(13)
V-TONE BASS DRIVER DI BDI21
(15)
3