Remote Control; First Steps - Regent i351s Bedienungsanleitung

EN

Remote control

POWER ON/STANDBY button
1.
- turning on/off the pickup
2. DIMMER button - dimmer
HOME button - press to
3.
return to the main menu
PLAY/PAUSE button - press to
4.
pause/resume transmission
5. SLEEP button - puts the
receiver in the snooze mode
6. PREVIOUS button - press
to go back track
< Button - moves the cursor to the left
7.
8. OK button - confirmation
of the selection
9. NEXT button - press to skip a track
10. PRESET button
11. 0-9 buttons - selection of favorite
preset station, entering characters
12. MUTE button - mute
13. LOCAL button - press to access
local internet stations
14. BT button - press to enable/disable
transmission to headphones function
15. ALARM button
16. TIMER button
17. VOLUME + button -
Increase the volume
18. ^ button - move the cursor up
19. > button - moves the cursor to the right
20. v button - downward
movement of the cursor
21. VOLUME - button - decrease the volume
22. EQ button - equalizer settings

First steps

Connect the power cord to the device and to the wall socket. The radio will
ask if you want to activate network checking when switching on <Check
Network After Power On>. It is suggested to enable this feature <Yes>. in
this case, the radio will always check for a network connection.
Connecting to your Wi-Fi network
When the network configuration screen appears, you can select <YES> to start searching
for available Wi-Fi networks. If your router has WPS, you can select <WPS> to configure the
network. Scanning of the Wi-Fi network starts. After scanning, a list of available networks
will be displayed. Select your network from the list and enter your network password. If your
network is unsecured after selecting it from the list, the radio will connect to it automatically.
Note: The network password may have been set up by your
installer or your internet service provider.
Follow the steps below to enter your Wi-Fi password:
• turn the UP/DOWN knob to select a character,
• press the NEXT button or the right cursor button to go to the next entry,
• after completing the input, press the UP/DOWN OK dial to confirm.
Entering the Wi-Fi password using the remote control. Remember: the
cursor shows where you enter the character. Press the following numbers
on the remote control several times to get the correct characters:
1. 1 (space) @ ! # $ % & ( ) + - . / : ; < = > ? [ \ ] ^ { | } ~
2. 2 A B C a b c
3. 3 D E F d e f
4. 4 G H I g h i
5. 5 J K L j k l
6. 6 M N O m n o
7. 7 P Q R S p q r s
8. 8 T U V t u v
9. 9 W X Y Z w x y z
Alternatively, use the cursor keys to enter the appropriate characters:
• < - go to the previous field, the field may be overwritten
• > - go to the next field, the last entry is kept.
• ^/v - character selection
• OK - click twice to confirm the entered password
The device will try to connect to the wireless network. It may take a few seconds
to connect to the network. After the connection is established, the main
menu will be displayed. You can now start enjoying your internet radio.
EN