Philips sonicare Cordless Power Flosser 3000 Serie Bedienungsanleitung Seite 16

16
English
Low
Empty
Cleaning
Note: When the low battery indicator appears, the
Power Flosser is designed to provide at least 3
flossing sessions, each session lasting 1 minute.
The Cordless Power Flosser needs to be cleaned once
a week. Clean the device and the accessories as
follows. Accessories may vary by model.
Warning: Do not clean the Cordless Power Flosser
while the charging cord and adapter are attached.
Unplug the device and close the charging port
cover before cleaning.
Reservoir
Gently remove the reservoir from the Cordless Power
Flosser by twisting. The reservoir can be hand washed
with warm water and mild soap or cleaned in the top
rack of the dishwasher.
Handle
When necessary, you can clean the handle by wiping
with a soft cloth and mild soap.
Nozzles
- Regular cleaning: Remove the nozzle from the
handle. Rinse the tip under warm water.
- Every few months, or if your nozzle becomes
clogged: Soak the nozzle in a container of 2 parts
water and 1 part vinegar for 5 minutes. Rinse the
nozzle with warm water.
Internal components, hose and handle
Fill the reservoir with warm water and add 1-2
tablespoons of white vinegar. Point the nozzle at the
sink and turn on the Cordless Power Flosser to run the
solution through the Cordless Power Flosser until the
Flashing amber
Flashing amber for 5 seconds and
the Power Flosser turns off
automatically