Technical Data - ROBENS DUNKERY BEACON Bedienungsanleitung

LIGHT MODES
Press the button to alternate the functions: High -> Mid ->
Low -> Strobe -> SOS -> OFF
USE OF THE LAMP
• Open battery compartment by rotating the upper and
lower parts of the casing, so the "open" mark (5.) cor-
responds with the notch on the upper casing. (4.)
• Insert 3 x 1.5V AAA batteries (not included), observe
polarity.
• Please use batteries of high quality and take out the
batteries if you do not use the light for a
long time, or the light can be damaged by electrolyte
leakage or battery explosion which is
caused by low quality battery.
• Please clean the contacts of your light from time to
time, especially if the light flickers or doesn't light up
• Lamp can be use d hanging from the hanger, standing
using the hanger as support or attached to
magnetic surfaces using the built in magnet.
• Lamp can be cleaned with water and a damp rag.
• Lamp is water resistant to IPx4.
• Do not use corrosive liquids to clean the lamp.
• Do not stare into the light source.
• Do not modify the product.
2
LIGHT SOURCE: 3W LED

TECHNICAL DATA

4.5V (3x1.5V AAA not included)
Class 3 appliance
DISPOSE OF PRODUCT ACCORDING
TO LOCAL REGULATIONS
, 3W