Recharge The Jump Starter - Topdon JUMPSURGE 3000 Bedienungsanleitung

A Guide To The LED Light:
Press the Power Button
starter.
Press and Hold the Power Button
turn on the LED Light. Then Press the Power Button once to
toggle between Flashlight, Strobe, SOS, and POWER OFF.
RECHARGE THE JUMP
STARTER
The JUMPSURGE3000 comes partially charged and needs
to be fully charged before use. Please charge your jump
starter through the Type-C In port once you receive it.
Note:
Only jump-start vehicles when the battery level of the jump
starter is above 50%.
once to turn on the jump-
for 3 Seconds to
EN | 9