How To Jump Start Vehicles(12V Only) - Topdon JUMPSURGE 3000 Bedienungsanleitung

HOW TO JUMP START
VEHICLES(12V ONLY)
Important:
Before attempting to jump-start a vehicle, make sure
you have turned off all of the power loads of the vehicle,
including headlights, radio, air conditioning, etc.
Step 1:
Plug the blue end of the battery clamps into the socket on
the jump starter.
Step 2:
Connect the other end of the battery clamps to the vehicle
battery. Red clamp to positive polarity(+), black clamp to
negative polarity(-).
Step 3:
Press the Power Button
starter. The Battery Level Indicator
will light up, which means the tool is ready to jump-start a
vehicle. The Status Indicator
(Red)
once to power on the jump
will turn green which
(Black)