English - IKEA TRÅDFRI AA-1954427-1 Bedienungsanleitung

ENGLISH

QUICK GUIDE
If you have an IOS device:
Go to the App Store and download the TRÅDFRI app. The
app will take you through the process of installing your
gateway and other devices.
If you have an Android device:
Go to Google Play and download the TRÅDFRI app. The
app will take you through the process of installing your
gateway and other devices.
GATEWAY FUNCTIONS
ON/OFF
Light off: The power is off
Light on: The power is on
Network
Light off: There is no TRÅDFRI network.
Light pulsing: No connected TRÅDFRI devices are
found.
Light on: Your TRÅDFRI network is connected.
Internet
Lights off: There is no Internet connection.
Lights pulsing: You are not properly connected to
the Internet.
Lights on: There is an Internet connection.
Pairing: Follow the instructions below to add IKEA
Smart Lighting products to your system.
All manuals and user guides at all-guides.com
ADDING DEVICES TO YOUR GATEWAY
You cannot add light sources directly to your gateway. A
TRÅDFRI steering device is needed to add them.
ADDING STEERING DEVICES TO YOUR GATEWAY
To add steering devices, just follow the steps below:
If you have an IOS device:
Go to the App Store and download the TRÅDFRI app. The
app will take you through the process of adding devices.
If you have an Android device:
Go to Google Play and download the TRÅDFRI app. The
app will take you through the process of adding devices.
FACTORY RESET
Open and remove the gateway lid. Push a pin into the
pinhole on top of the gateway for at least 5 seconds.
IMPORTANT!
— The gateway is for indoor use only and can be used in
— Do not leave the gateway in direct sunlight or near
— Do not subject the gateway to wet, moist or
— The range between the gateway and the receiver is
— Different building materials and placement of the
temperatures ranging from 0ºC to 40 ºC.
any heat source, as it may overheat.
excessively dusty environments, as this may cause
damage.
measured in open air.
units can affect the wireless connectivity range.
4