Herunterladen Inhalt Inhalt Diese Seite drucken

Display And Control Elements - Husqvarna S 11 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 38
Read the operating manual carefully before starting to use the vac-
uum cleaner. The operating manual provides important instructions
for safety, commissioning, operation, maintenance and care. Keep
the operating manual in a safe place and, in case you sell the unit,
hand it on to the next owner.
The manufacturer reserves the right to carry out modifications to
the design and equipment.
Do not perform any other work than described in this manual.
This machine is intended for commercial use, for example, in
hotels, schools, hospitals, factories, shops, offices and in the rental
business.
When unpacking, check for completeness and transport damage.
Before use, the operators should be provided with information,
instructions and training for the use of the vacuum cleaner and the
substances that it is to be used for, including the safe procedure for
the removal of the gathered material.
3

Display and control elements

Switch position
Function
0
Vacuum cleaner is switched off
I
Vacuum cleaner is running
Standby mode for ON/OFF
A
automatic mode
Standby mode for ON/OFF
RA
automatic mode
Automatic filter cleaning function
Fill level indicator *
35
Setting the suction hose
diameter *
Setting the motor speed*
* depending on model
All manuals and user guides at all-guides.com
Description
- Plug socket under voltage
- Plug socket under voltage
- Automatic filter cleaning function off
- Plug socket under voltage
- The vacuum cleaner is switched on and off via the connected electrical/
- Standby mode like >A< plus automatic filter cleaning
- Filter cleaning is performed automatically during the next working break
- When the container is full and/or there is a blockage in the suction hose, the
- On M-/H-/H-asbestos vacuum cleaners for volume flow monitoring, to trigger
- Adjust the suction power with the speed control
compressed air tool* at the plug socket
when the minimum volume flow level is reached (switch setting RA)
full indicator lights up. On the M and H vacuum cleaners, an acoustic signal
is also emitted
an audible warning signal if the air speed falls below 20 m/s
en- 9

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

IsIsc l/m/h-1425Isc l/m/h-1450

Inhaltsverzeichnis