Operation; Sound Mode - Magnat SBW 300 Wichtige Hinweise Zur Installation / Garantieurkunde

OPERATION

Soundbar controls (front) (Fig. 3)
(1) Sensor for remote control: Please aim at this sensor when using the remote control.
(2) Remote LED: This LED flashes when the Soundbar receives a signal via the remote control.
Top controls with LED display (Fig. 4)
(3) ON/STBY: Switches the device on when it is in the standby mode. Conversely the device can be switched from power
operation to the standby mode.
(4) VOLUME -/+: Increases (+) or decreases (-) the volume.
(5) BLUETOOTH: Switches the device to the pairing mode when in Bluetooth operation to establish a connection to a Bluetooth
source device. The blue LED status indicator (Fig. 4, pos. 11) flashes quickly.
(6) SOURCE: Selects the input.
(7) POWER (Standby Indicator): When the Soundbar is on standby, the standby indicator is red.
(8) DOLBY AUDIO: The symbol lights up when a Dolby Audio-Dolby Digital encoded signal is detected (digital and HDMI
input only).
(9) SURROUND-MODUS: The symbol lights up when the surround mode is active.
(10) NIGHT-MODUS: The symbol lights up when the night mode is active.
(11) BLUETOOTH: The symbol flashes when the Bluetooth input is selected but there is no pairing with a device. The symbol
lights up continuously when Bluetooth pairing is successful.
(12) SOURCE: The selected input is indicated by different colours:
• Purple:
HDMI input
• Green: Analogue input
• Blue:
Bluetooth input
• Yellow:
Digital input
• Light Blue: USB input
Subwoofer controls (front) (Fig. 6a)
(18) LED-STATUS INDICATION: The LED lights up blue when the subwoofer is in operating mode. See the „Initial start-up" .
Subwoofer controls (back) (Fig. 6b):
(19) PAIR: Starts the manual pairing mode on the subwoofer. See the „Initial start-up" section.
(20) UPDATE PORT: Connection for service only.
Operation with the system remote control (Fig. 7):
(21) ON/STBY: Switches the unit on when it is in standby mode. If the LED (FIg. 4, Pos. 7) does not light up, you must plug in the
power cable on the back. Conversely, the unit can be switched from power mode to standby.
(22) SOURCE: Selects the audio input:
- HDMI/ARC (HDMI/ARC input)
- AUX (analog input)
- BT (Bluetooth input)
- OPT (optical input)
- USB (USB input)
(23) MUTE: Switches the sound on and off. The Top Panel indicator flashes while Mute is activated.
(24) VOLUME: Increases (+) or decreases (-) the volume.
(25) SUB: Increases (+) or decreases (-) the volume of the subwoofer.
(26) NIGHT: Activates or deactivates a playback mode with reduced dynamics and a frequency response that is adapted for
sound-sensitive situations (e.g. late at night).
(27) SURR: Switches the 3D surround sound function on or off.

(28) SOUND MODE:

MUSIC: Optimises the frequency response of the unit for music playback.
MOVIE: Optimises the frequency response of the unit for film sound reproduction.
VOCAL: Emphasises the vocal range for particularly good speech intelligibility.
14